Physical Port
- 16-port 10/100Base-TX RJ-45 copper with PoE in-line supported
- 2-port 10/100/1000Base-T RJ-45 copper
- 2 1000Base-X mini-GBIC/SFP slots to share with Port-17 to Port-18
- Reset button for system management
PoE
- Complies with IEEE 802.3at High Power over Ethernet End-Span PSE
- Complies with IEEE 802.3af Power over Ethernet End-Span PSE
- Up to 16 IEEE 802.3at / 802.3af devices powered
- Supports PoE Power up to 30.8 watts for each PoE port
- Detects powered device (PD) automatically
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m
- PoE Management – Per port PoE function enable/disable- PoE Port Power feeding priority- Per PoE port power limit- PD classification detection- PoE Power sequential- PoE schedule
Layer 2 Features
- Auto-MDI/MDI-X detection on each RJ-45 port
- Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
- Supports broadcast storm control
- Supports VLAN: – IEEE 802.1Q tag-based VLAN, up to 32 VLANs groups, out of 4095 VLAN IDs- Port-based VLAN, up to 16 VLAN groups- MTU VLAN (Multi-tenant Unit VLAN)
- Supports Link Aggregation – 802.3ad Link Aggregation Control Protocol (LACP)- Cisco ether-channel (Static Trunk)
- Supports Spanning Tree Protocol – STP, IEEE 802.1d Spanning Tree Protocol- RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
- Port mirroring to monitor the incoming or outgoing traffic on a particular port
- Provides port mirror (Many-to-1)
- Loopback protection to avoid broadcast loops
Quality of Service
- 2 priority queues on all switch ports
- Traffic classification- Port-based priority- IEEE 802.1p-based priority- IP TOS / DSCP-based priority- TCP / UDP port-based QoS
- Strict priority and Weighted Round Robin (WRR) CoS policies
Multicast
- Supports IGMP Snooping v1 and v2
Security
- Physical port to MAC address binding
- TCP/UDP port number filter: Forwarding or discarding typical network applications
- Port mirroring to monitor the incoming or outgoing traffic on a particular port
Management
- Switch Management Interfaces- Web switch management- SNMP v1 switch management
- Supports DHCP Option82 and DHCP Relay
- Firmware upload/download via HTTP
- Hardware reset button for system reboot or reset to factory default